SDS

Material Safety Data Sheet
1. PRODUCT IDENTIFICATION
Product Name: 84160 FAST CURE 60 SECOND EPOXY (HARDENER)
Item No: 1007A
Product Type: Epoxy hardener
2. COMPOSITION/INFORMATION ON INGREDIENTS
Component: Weight% ACGIH; TLV-TWA OSHA PEL
POLYAMINE-POLYMERCAPTAN
BLEND
Mixture
_
>80 Not listed Not listed
2,2-OXYBIS (N,N-
DIMETHYLETHANAMINE)
3033-62-3
<5 0.05 ppm Not listed
SUBSTITUTED AMIDINE
6674-22-2
<5 Not listed Not listed
3. HAZARDS IDENTIFICATION
Toxicity:
Corrosive. The product causes burns of eyes, skin and mucous membranes.
Primary Routes of Entry:
Eye and skin contact, ingestion, inhalation
Signs and Symptoms of Exposure:
Eye irritation may be severe and result in injury. Contact causes severe skin irritation and possible burns.
Inhalation of vapours is irritating to the respiratory system, may cause throat pain and cough. Ingestion can
cause damage to the mucous membranes or other tissues with which contact is made.
Aggravated Medical Condition:
Preexisting eye, skin and respiratory disorders may be aggravated by overexposure to this product.
WHMIS Hazard Class:
E CORROSIVE MATERIAL
4. FIRST AID MEASURES
Ingestion:
Do not induce vomiting. Slowly dilute with 1-2 glasses of water or milk and seek medical attention. Never
give anything by mouth to an unconscious person.
Inhalation:
Move to fresh air in case of accidental inhalation of vapours. Oxygen or artificial respiration if needed. If
symptoms persist, call a physician.
Skin Contact:
Rinse immediately with plenty of water for at least 15 minutes. Obtain medical attention. Wash
contaminated clothing before re-use. Discard contaminated shoes.
Eye Contact:
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Immediate medical
attention is required.
5. FIRE FIGHTING MEASURES
Flash Point °F(C°):
>200°F (>93°C)
Recommended Extinguishing Media:
Dry chemical, Carbon dioxide, Foam
Special Fire-Fighting Procedures:
Firefighters shoud wear self-contained breathing apparatus and protective
clothing to prevent all skin and eye contact
Hazardous Products of Combustion:
Oxides of carbon, Oxides of nitrogen, Oxides of sulfur, Hydrogen sulfide
Unusual Fire/Explosion Hazards:
Irritating or toxic gases or fumes may be generated by thermal
decomposition or combustion.
Lower Explosive Limit:
n/d
Upper Explosive Limit:
n/d
6. ACCIDENTAL RELEASE MEASURES
Spill Procedures:
Maintain good ventilation. Take up with an inert absorbent. Store in a closed waste container until disposal.
Wear appropriate protective and respiratory equipment.
1 of 3
ITW Permatex
10 Columbus Blvd.
Hartford, CT 06106 USA
Telephone: 1-87-Permatex
[phone]
Emergency: 800-255-3924 (ChemTel)
International Emergency: 00+ 1+ 813-248-0585