SDS

Material Safety Data Sheet
1. PRODUCT IDENTIFICATION
Product Name: 84109 STEEL WELD (RESIN)
Item No: PTX202005B
Product Type: Epoxy resin
2. COMPOSITION/INFORMATION ON INGREDIENTS
Component: Weight% ACGIH; TLV-TWA OSHA PEL
BISPHENOL A/EPICHLOROHYDRIN
BASED EPOXY RESIN
25068-38-6
30-60 Not listed Not listed
IRON
7439-89-6
10-30 Not listed Not listed
LIMESTONE
1317-65-3
10-20 Not listed 15 mg/m
3
ELASTOMER MODIFIED
DIGLYCIDYL ETHER
68909-14-8
<5 Not listed Not listed
SILICON
7440-21-3
<5 Not listed 15 mg/m
3
NEOPENTYL GLYCOL DIGLYCIDYL
ETHER
17557-23-2
<5 Not listed Not listed
CRYSTALLINE SILICA
14808-60-7
0.1-1.0 0.025 mg/m
3
Not listed
3. HAZARDS IDENTIFICATION
Toxicity:
This material is irritating to skin, eyes and respiratory tract. May cause skin sensitization. High
concentrations may cause central nervous system (CNS) depression.
Primary Routes of Entry:
Eye and skin contact, ingestion, inhalation
Signs and Symptoms of Exposure:
May cause pain, redness or swelling of the eyes and excessive blinking and tear production. Repeated
skin contact may cause allergic skin reactions. Ingesting may cause abdominal pain and vomiting.
Excessive overexposure may cause giddiness, dizziness, headache, nausea and in extreme cases,
unconsciousness and respiratory depression.
Component: Weight% NTP ACGIH Carcinogens IARC Carcinogen
CRYSTALLINE SILICA
14808-60-7
0.1-1.0 A2 - Suspected
Human Carcinogen
Group 1 Monograph 68, 1997
(inhalation of quartz)
Aggravated Medical Condition:
Preexisting pulmonary and dermatological disorders.
4. FIRST AID MEASURES
Ingestion:
If swallowed, do not induce vomiting - seek medical advice. Never give anything by mouth to an
unconscious person.
Inhalation:
Move to fresh air in case of accidental inhalation of vapours. If symptoms persist, call a physician.
Skin Contact:
Wash off immediately with soap and plenty of water removing all contaminated clothes and shoes. Obtain
medical attention.
Eye Contact:
In case of contact, immediately flush eyes with plenty of water for at least 15 minutes and get medical
attention if irritation persists.
5. FIRE FIGHTING MEASURES
Flash Point °F(C°):
>200°F (>93°C)
Recommended Extinguishing Media:
Dry chemical, Carbon dioxide, Foam
Special Fire-Fighting Procedures:
Firefighters shoud wear self-contained breathing apparatus and protective
clothing to prevent all skin and eye contact
1 of 3
ITW Permatex
10 Columbus Blvd.
Hartford, CT 06106 USA
Telephone: 1-87-Permatex
[phone]
Emergency: 800-255-3924 (ChemTel)
International Emergency: 00+ 1+ 813-248-0585