Specification Sheet

Technical Data Sheet Ultra Grey

Gasket Maker
Permatex, Ultra Grey and Fast Orange are trademarks of Illinois Tool Works, Inc. © Copyright 2006. ITW Permatex, Inc. All rights reserved
For Cleanup
1.
Remove uncured product from parts and hand-tools with
Permatex
®
Fast Orange
®
Wipes or Fast Orange
®
Hand
Cleaners. If skinned over, break film with a dry cloth to
remove as much as possible. Remove the remaining
material with Permatex
®
Gasket Remover.
2.
Clean hands with a dry cloth or Permatex
®
Fast
Orange

Hand Cleaner.
PROPERTIES OF UNCURED MATERIAL
Typical Value
Chemical Type
Oxime silicone rubber
Appearance
Grey non-sag paste
Odor
Low odor
Specific Gravity
1. 5
Extrusion rate @ 25
°
C, (grams/min)
>250
Flash Point
°
C (
°
F)
>93 (>200)
TYPICAL CURING PERFORMANCE
Permatex

Ultra Gray

Gasket Maker cures on exposure to
moisture in the air. The product dries tack free in one hour
and fully cures in 24 hours. Cure times will vary with
temperature, humidity and gap.
PERFORMANCE OF CURED MATERIAL
After 7 days at 25°C (77
°
F), 50% Relative Humidity
Typical Values
Hardness (Shore A)
>45
Elongation, %*
>120
Tensile Strength, N/mm
2
(psi) **
>2.6
(>377)
*Material will stretch 1.2 times its original length before breaking.
**Amount of force required to break material.
TYPICAL ENVIRONMENTAL RESISTANCE
Temperature Resistance
Typical Values
Continuous, °C (°F)
-54 to 232
(-65 to 450)
Intermittent, °C (°F)
-54 to 260
(-65 to 500)
Chemical / Solvent Resistance
The product retains effective properties in contact with
automotive fluids, such as motor oil, transmission fluids,
alcohol and antifreeze solutions. Note: Not recommended for
parts in contact with gasoline.
GENERAL INFORMATION
This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected as
a sealant for chlorine or other strong oxidizing materials.
For safe handling information on this product, consult the
Material Safety Data Sheet, (MSDS).
ORDERING INFORMATION
Part Number
Container Size
82194
3.5 oz. tube, carded
85084
9.5 oz. PowerBead
82195
13 oz. cartridge
OEM INTERCHANGE
Manufacture
OEM Specifications Numbers
Acura
8718-550030
Chrysler
82300234
82300235
Daewoo Motors
AA1204020
Honda
296380
08718-0001
296381
HC2963817
Hyundai
0023113800
4C116-21000
Maxion
0710129
710129
Mitsubishi
MD997740
MD997110
Nissan
999MP-A7007
KPS51000150
Toyota
00001-01001
00001-01002
00295-00102
00295-01208
00295-01282
STORAGE
Products shall be ideally stored in a cool, dry location in
unopened containers at a temperature between 8
°
to 28
°
C
(46
°
to 82
°
F) unless otherwise labeled. Optimal storage is at
the lower half of this temperature range. To prevent
contamination of unused product, do not return any material to
its original container.
NOTE
The data contained herein are furnished for information only
and are believed to be reliable. We cannot assume
responsibility for the results obtained by others over whose
methods we have no control. Permatex, Inc. specifically
disclaims all warranties expressed or implied, including
warranties of merchantability or fitness for a particular
purpose, arising from sale or use of Permatex, Inc.
products and disclaims any liability for consequential or
incidental damages of any kind, including lost profits.
This product may be covered by one or more United States or
foreign patents or patent applications.