Specification Sheet

Toll Free: 87 PERMATEX
(877-376-2839)
10 Columbus Blvd., Hartford,
Connecticut 06106
6875 Parkland Boulevard, Solon
Ohio 44139
Technical Data Sheet
Permatex

Super Glue Gel
AAM Revised 09/02
NOT FOR PRODUCT SPECIFICATIONS.
THE TECHNICAL DATA CONTAINED HEREIN ARE INTENDED AS REFERENCE ONLY.
PLEASE CONTACT PERMATEX, INC., TECHNICAL SERVICE DEPARTMENT FOR ASSISTANCE AND RECOMMENDATIONS FOR YOUR SPECIFIC APPLICATION.
PERMATEX, INC., HARTFORD SQUARE NORTH, 10 COLUMBUS BOULEVARD, HARTFORD, CT 06106 PHONE – (1-87PERMATEX)
PRODUCT DESCRIPTION S.I.N.: 834-300
Permatex

Super Glue Gel is an instant-bonding adhesive in a
gel form designed to bond close fitting surfaces quickly. Sets
in seconds to form a permanent, transparent bond. Supplied
as a gel, the adhesive may be used on vertical, overhead and
hard to reach surfaces. It is effective on metal, rubber, glass,
aluminum, ceramics, vinyl, alloys, plastics and other non-
porous surfaces.
PRODUCT BENEFITS
• Useful on vertical and overhead surfaces
• No drip, high performance gel formula
• Ready to use
• No mixing
• Permanent, transparent bond
• Fills gaps
TYPICAL APPLICATIONS
• Automotive trim
• Logos
• Knobs
• Gear shift logos
• Minor interior repairs
DIRECTIONS FOR USE
1. Protect the work surface against accidental spills, as
cyanoacrylates can mark finishes and fabrics.
2. Clean and ensure a close fit on the surfaces to be
bonded. Wiping wood with a damp cloth will increase
bonding speed.
3. To use the clean and easy self-piercing tube, screw
nozzle onto tube clockwise, hold base of nozzle and
remove the cap counter-clockwise.
4. Apply the glue to one of the surfaces. Use sparingly,
one square inch of surface area requires only one drop
of glue.
5. Hold the surfaces to be bonded together for 15 to 30
seconds. No clamping is required, even on wood. DO
NOT REPOSITION THE PARTS.
6. Replace the cap, and store the glue in a cool spot.
7. Allow the parts to cure overnight.
For Cleanup
1. To remove Super Glue, use Super Glue Remover,
acetone or nail polish remover that contains acetone.
2.
To remove from hard surfaces such as Formica

,
saturate a soft cloth or paper towel with the acetone and
allow to rest on the spot for about 10 – 15 minutes.
After the Super Glue is removed, a white or light colored
spot may be left which is easily removed by applying
vegetable oil or olive oil to the spot to restore the color.
3. Clean hands with Super Glue Remover or acetone then
use Permatex

brand hand cleaners.
PROPERTIES OF UNCURED MATERIAL
Typical Value
Chemical Type Ethyl cyanoacrylate
Appearance Clear gel
Odor Mild pungent
Specific Gravity 1.05
Flash Point, TCC, °F 150 - 200
TYPICAL CURING PERFORMANCE
Permatex

Super Glue Gel cures on exposure to moisture.
Fixture time is 15 – 30 seconds and full cure within 2 hours.
TYPICAL ENVIRONMENTAL RESISTANCE
Temperature Resistance
Typical Values
Continuous, °C (°F) -54 to 82 (-65 to 180)
Chemical / Solvent Resistance
The product retains effective properties when in contact with
most solvents.
GENERAL INFORMATION
This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected as
a sealant for chlorine or other strong oxidizing materials.
For safe handling information on this product, consult the
Material Safety Data Sheet, (MSDS).
ORDERING INFORMATION
Part Number Container Size
82191 2 g tube, 1-pack carded
30879 2 g tube, 2-pack carded
STORAGE
Products shall be ideally stored in a cool, dry location in
unopened containers at a temperature between 8° to 28°C
(46° to 82°F) unless otherwise labeled. Optimal storage is at
the lower half of this temperature range. To prevent
contamination of unused product, do not return any material to
its original container.