Specification Sheet

Toll Free: 87 PERMATEX
(877-376-2839)
10 Columbus Blvd., Hartford,
Connecticut 06106
6875 Parkland Boulevard, Solon
Ohio 44139
Technical Data Sheet
Permatex

Ultra Slick™ Engine
Assembly Lube
AAM Revised 10/02
NOT FOR PRODUCT SPECIFICATIONS.
THE TECHNICAL DATA CONTAINED HEREIN ARE INTENDED AS REFERENCE ONLY.
PLEASE CONTACT PERMATEX, INC., TECHNICAL SERVICE DEPARTMENT FOR ASSISTANCE AND RECOMMENDATIONS FOR YOUR SPECIFIC APPLICATION.
PERMATEX, INC., HARTFORD SQUARE NORTH, 10 COLUMBUS BOULEVARD, HARTFORD, CT 06106 PHONE – (1-87PERMATEX)
PRODUCT DESCRIPTION S.I.N.: 834-300
Permatex

Ultra Slick™ Engine Assembly Lube is a red, tacky
lubricant, which is a proven pre-lubricant for all gasoline and
diesel engines. Its tacky lubricating film forms a protective
coating during assembly and critical start-up and wear-in
periods. Permatex
®
Ultra Slick™ Engine Assembly Lube base
oils are highly refined and fortified with a unique blend of
extreme pressure (EP) additives. These additives enhance
and sustain the anti-scuffing, galling and wear-in properties of
the product.
PRODUCT BENEFITS
• Excellent adhesion to metal surfaces; will not drain off
during assembly
• EP agents that work in unison for superior wear-in
protection needed prior and during initial engine start up
• Treated with special rust and high temperature oxidation
inhibitors
• Exceeds all OEM specifications as an engine and bearing
assembly lubricant
TYPICAL APPLICATIONS
• Engine bearings
• Camshafts and lifters
• Rocker arms
• Valves and guides
• Rocker shift assemblies
• Timing components
DIRECTIONS FOR USE
1. Apply a liberal coating to engine bearings, camshaft and
lifters, and on timing components as the engine is being
assembled.
PROPERTIES OF UNCURED MATERIAL
Typical Value
Chemical Type Petroleum distillates
Appearance Red liquid
Odor Mild petroleum
Viscosity Tacky gel
Specific Gravity 0.91
Flash Point, C.O.C.,
_
F
560
GENERAL INFORMATION
This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected as
a lubricant for chlorine or other strong oxidizing
materials.
For safe handling information on this product, consult the
Material Safety Data Sheet, (MSDS).
ORDERING INFORMATION
Part Number Container Size
81950 4 oz. bottle
STORAGE
Products shall be ideally stored in a cool, dry location in
unopened containers at a temperature between 8
_
to 28
_
C
(46
_
to 82
_
F) unless otherwise labeled. Optimal storage is at
the lower half of this temperature range. To prevent
contamination of unused product, do not return any material to
its original container.
NOTE
The data contained herein are furnished for information only
and are believed to be reliable. We cannot assume
responsibility for the results obtained by others over whose
methods we have no control. Permatex, Inc. specifically
disclaims all warranties expressed or implied, including
warranties of merchantability or fitness for a particular
purpose, arising from sale or use of Permatex, Inc.
products and disclaims any liability for consequential or
incidental damages of any kind, including lost profits.
This product may be covered by one or more United States or
foreign patents or patent applications.