SDS

Material Safety Data Sheet
1. PRODUCT IDENTIFICATION
Product Name: 101BR SENSOR SAFE ULTRA COPPER SILICONE HIGH TEMP RTV 3 OZ
Item No: 81878
Product Type: Silicone
2. COMPOSITION/INFORMATION ON INGREDIENTS
Component Weight% ACGIH; TLV-TWA OSHA PEL
POLY (DIMETHYLSILOXANE),
HYDROXY TERMINATED
70131-67-8
50-70 Not listed Not listed
POLYDIMETHYLSILOXANE
63148-62-9
20-40 Not listed Not listed
MODIFIED SILICON DIOXIDE
68611-44-9
<10 Not listed Not listed
VINYL OXIMINOSILANE
2224-33-1
<7 Not listed Not listed
IRON OXIDE
1309-37-1
<3 5 mg/m
3
10 mg/m
3
SILICA, MICA
12001-26-2
<3 3 mg/m
3
20 mppcf
2-BUTANONE OXIME
96-29-7
0.5-2.0 Not listed Not listed
3. HAZARDS IDENTIFICATION
Toxicity:
May cause eye and skin irritation. When this product if exposed to moisture, butanone oxime may be
formed. May be harmful if swallowed. May irritate lips, gums, tongue, mouth, nose and throat. Note: This
product does not contain microcyrstalline silica.
Primary Routes of Entry:
Eye and skin contact, ingestion, inhalation
Signs and Symptoms of Exposure:
Butanone oxime produced during curing is toxic and irritates eyes, nose and throat. Overexposure to the
silane may cause coma and respiratory failure.
Component Weight% NTP ACGIH Carcinogens IARC Carcinogen
IRON OXIDE
1309-37-1
<3 A4 - Not Classifiable Group 3, Supplement 7 1987;
Monograph 1 1972
Aggravated Medical Condition:
Persons with respiratory problems such as emphysema and asthma should avoid inhalation.
4. FIRST AID MEASURES
Ingestion:
Rinse mouth. Do not induce vomiting. Slowly dilute with 1-2 glasses of water or milk and seek medical
attention. Never give anything by mouth to an unconscious person.
Inhalation:
Move to fresh air in case of accidental inhalation of vapours. Obtain medical attention.
Skin Contact:
Wipe off material with paper towel or cloth Wash off with soap and water If skin irritation persists, call a
physician
Eye Contact:
In case of contact, immediately flush eyes with plenty of water for at least 15 minutes and get medical
attention if irritation persists.
5. FIRE FIGHTING MEASURES
Flash Point °F(C°):
>200°F TCC
Recommended Extinguishing Media:
Carbon Dioxide, Dry Chemicals, Foam.
Special Fire-Fighting Procedures:
Water spray may be ineffective on flames but should be used to keep fire-
exposed containers cool.
Hazardous Products of Combustion:
Oxides of nitrogen, Oxides of carbon, Methyl ethyl ketone, possibly methyl
ethyl ketoxime, Silica fume, Formaldehyde
Unusual Fire/Explosion Hazards:
None.
1 of 3
ITW Permatex
10 Columbus Blvd.
Hartford, CT 06106 USA
Telephone: 1-87-Permatex
[phone]
Emergency: 800-255-3924 (ChemTel)
International Emergency: 00+ 1+ 813-248-0585