Specification Sheet

Toll Free: 87 PERMATEX
(877-376-2839)
10 Columbus Blvd., Hartford,
Connecticut 06106
6875 Parkland Boulevard, Solon
Ohio 44139
Technical Data Sheet
Permatex

Super Clear Vinyl
Adhesive Repair Kit
AAM Revised 11/02
NOT FOR PRODUCT SPECIFICATIONS.
THE TECHNICAL DATA CONTAINED HEREIN ARE INTENDED AS REFERENCE ONLY.
PLEASE CONTACT PERMATEX, INC., TECHNICAL SERVICE DEPARTMENT FOR ASSISTANCE AND RECOMMENDATIONS FOR YOUR SPECIFIC APPLICATION.
PERMATEX, INC., HARTFORD SQUARE NORTH, 10 COLUMBUS BOULEVARD, HARTFORD, CT 06106 PHONE – (1-87PERMATEX)
PRODUCT DESCRIPTION S.I.N.: 834-300
Permatex

Super Clear Vinyl Adhesive Repair Kit is a clear
adhesive specially formulated to provide high performance
flexible bonds. Makes undetectable, waterproof repairs
without unsightly vinyl tapes and patches. The kit contains
application nozzle and grain pattern paper.
PRODUCT BENEFITS
• Repairs rips and tears
• Restores to original finish
• Dries completely clear
• Strong and flexible
• Easy to use
• Dries fast
TYPICAL APPLICATIONS
• Vinyl seats
• Vinyl tops
• Luggage
• Clothing
DIRECTIONS FOR USE
1. Make sure that the damaged area is clean and dry.
2. Puncture the seal in the top of the tube. Twist on nozzle
tip provided.
3. For large rips, cuts and tears, place a cloth patch under
the damaged area for extra strength. Apply sealant to
the damaged area. To reproduce grain, place the
special paper over the wet sealant and secure the repair
with masking tape. Place weighted object on the grain
paper to hold repair down firmly. Allow to dry 6 – 8
hours. Peel grain paper away. Repair is complete.
4. For small rips, cuts and tears, apply sealant to the
edges of the damaged area. Press edges together and
secure with masking tape for approximately 10 minutes.
5. Wait 6 – 8 hours before using the repaired object. For
maximum strength, allow to dry overnight.
For Cleanup
1. For cleanup, use acetone or nail polish remover.
2.
Clean hands with a dry cloth or Permatex

Fast
Orange

hand cleaner.
PROPERTIES OF UNCURED MATERIAL
Typical Value
Chemical Type Vinyl resin
Appearance Clear liquid
Specific Gravity 0.91
Flash Point °C (°F) TCC <-18(0)
GENERAL INFORMATION
This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected
for use with chlorine or other strong oxidizing materials.
For safe handling information on this product, consult the
Material Safety Data Sheet, (MSDS).
ORDERING INFORMATION
Part Number Container Size
81786 (VR-12A) 1 kit, carded
STORAGE
Products shall be ideally stored in a cool, dry location in
unopened containers at a temperature between 8°
to 28°C
(46°
to 82°F) unless otherwise labeled. Optimal storage is at
the lower half of this temperature range. To prevent
contamination of unused product, do not return any material to
its original container.
NOTE
The data contained herein are furnished for information only
and are believed to be reliable. We cannot assume
responsibility for the results obtained by others over whose
methods we have no control. Permatex, Inc. specifically
disclaims all warranties expressed or implied, including
warranties of merchantability or fitness for a particular
purpose, arising from sale or use of Permatex, Inc.
products and disclaims any liability for consequential or
incidental damages of any kind, including lost profits.
This product may be covered by one or more United States or
foreign patents or patent applications.