Specification Sheet

Toll Free: 87 PERMATEX
(877-376-2839)
10 Columbus Blvd., Hartford,
Connecticut 06106
6875 Parkland Boulevard, Solon
Ohio 44139
Technical Data Sheet
Permatex

Flowable Silicone
Windshield and Glass Sealer
AAM Revised 09/02
NOT FOR PRODUCT SPECIFICATIONS.
THE TECHNICAL DATA CONTAINED HEREIN ARE INTENDED AS REFERENCE ONLY.
PLEASE CONTACT PERMATEX, INC., TECHNICAL SERVICE DEPARTMENT FOR ASSISTANCE AND RECOMMENDATIONS FOR YOUR SPECIFIC APPLICATION.
PERMATEX, INC., HARTFORD SQUARE NORTH, 10 COLUMBUS BOULEVARD, HARTFORD, CT 06106 PHONE – (1-87PERMATEX)
PRODUCT DESCRIPTION S.I.N.: 834-300
Permatex
®
Flowable Silicone Windshield and Glass Sealer is a
solventless, flowable silicone RTV designed to flow into cracks
and seams to form a clear, tough flexible seal. It flows into
hidden and hard-to-reach areas. It cures to a tough
waterproof, durable, clear seal that is resistant to weather,
extreme temperatures, vibration, shock and most shop
chemicals.
PRODUCT BENEFITS
• Easy to use
• Flowable
• Temperature range -80ºF to 450ºF
• Waterproof
TYPICAL APPLICATIONS
• Windshields
• Sunroofs
• Windows
• Headlamp assemblies
• Marine glass
• RV vents and windows
DIRECTIONS FOR USE
1. Locate source of leak.
2. Clean and dry surfaces with alcohol.
3. Apply Permatex
®
Flowable Silicone Windshield and
Glass Sealer into the leak source; allow time for
penetration.
4. Wipe off excess sealant with clean rag.
5. Sealant is tack-free in one hour. Full cure within 24
hours.
PROPERTIES OF UNCURED MATERIAL
Typical Value
Chemical Type Polysiloxane
Appearance Clear
Specific Gravity 1.05
Viscosity Flow is similar to syrup
Flash Point, TCC,
_
C (
_
F) > 93 (200)
GENERAL INFORMATION
This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected as
a sealant for chlorine or other strong oxidizing materials.
For safe handling information on this product, consult the
Material Safety Data Sheet, (MSDS).
ORDERING INFORMATION
Part Number Container Size
81730 (65AR) 1.5 fl. oz. tube, carded
STORAGE
Products shall be ideally stored in a cool, dry location in
unopened containers at a temperature between 8
_
to 28
_
C
(46
_
to 82
_
F) unless otherwise labeled. Optimal storage is at
the lower half of this temperature range. To prevent
contamination of unused product, do not return any material to
its original container.
NOTE
The data contained herein are furnished for information only
and are believed to be reliable. We cannot assume
responsibility for the results obtained by others over whose
methods we have no control. Permatex, Inc. specifically
disclaims all warranties expressed or implied, including
warranties of merchantability or fitness for a particular
purpose, arising from sale or use of Permatex, Inc.
products and disclaims any liability for consequential or
incidental damages of any kind, including lost profits.
This product may be covered by one or more United States or
foreign patents or patent applications.