Specification Sheet

Toll Free: 87 PERMATEX
(877-376-2839)
10 Columbus Blvd., Hartford,
Connecticut 06106
6875 Parkland Boulevard, Solon
Ohio 44139
Technical Data Sheet
Permatex

Aerosol Anti-Seize
Lubricant
AAM Revised 10/02
NOT FOR PRODUCT SPECIFICATIONS.
THE TECHNICAL DATA CONTAINED HEREIN ARE INTENDED AS REFERENCE ONLY.
PLEASE CONTACT PERMATEX, INC., TECHNICAL SERVICE DEPARTMENT FOR ASSISTANCE AND RECOMMENDATIONS FOR YOUR SPECIFIC APPLICATION.
PERMATEX, INC., HARTFORD SQUARE NORTH, 10 COLUMBUS BOULEVARD, HARTFORD, CT 06106 PHONE – (1-87PERMATEX)
PRODUCT DESCRIPTION S.I.N.: 834-300
Permatex

Anti-Seize Lubricant is a heavy duty, high
temperature aerosol lubricant that prevents galling, seizing
and corrosion during assembly and assures easier
disassembly. Also reduces wear in heavy pressure
applications. The product contains tenacious metals, oils and
graphite materials that can be used on slow moving parts.
PRODUCT BENEFITS
• Effectively lubricates assemblies exposed to high
temperatures and heavy contact pressures
• Suitable for service up to 870°C (1,600°F)
• Reduce corrosion and seizing due to weathering or
chemicals
• Permits easy disassembly of parts exposed to heat or
corrosive environments
TYPICAL APPLICATIONS
• Spark plug threads installed into aluminum heads
• Exhaust manifold and engine bolts
• Anchor pins on brake assemblies
• U-bolts and spring bolts
• Lubricates and permits easy disassembly of assemblies
exposed to high temperatures and heavy contact
pressures, such as boiler and oven parts, jet engines, and
industrial turbines.
• Hinges, gears, chain, sprockets and rollers
DIRECTIONS FOR USE
1. Provide adequate ventilation.
2. For best results, apply to clean, dry surfaces.
3. Tap bottom of can to loosen the ball agitator. Shake
can for 2 minutes. For best results, aerosol can should
be at room temperature before spraying.
4. Holding can 8 to 10 inches from the surface to be
coated, press the nozzle and uniformly discharge the
product to the surface.
5 Spray or apply a light coat of the product directly to parts
where lubrication/protection is desired.
6. Wipe off excess material.
For Cleanup
1. Turn can upside-down and spray to clear nozzle.
2.
Clean hands with Permatex

brand hand cleaners.
PROPERTIES OF MATERIAL
Typical Value
Chemical Type Grease
Appearance Silver metallic liquid
Odor Light petroleum
Specific Gravity 1.17 (base)
Temperature Range,
_
C (
_
F) 870 (1,600)
Viscosity, cPs 200,000 (base)
Flash Point Aerosol, contents under pressure,
consult MSDS
NFPA 704 Flammability Rating 4 (Highly Flammable)
Particle size, µm
22.5
GENERAL INFORMATION
This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected
for use withchlorine or other strong oxidizing materials.
For safe handling information on this product, consult the
Material Safety Data Sheet, (MSDS).
ORDERING INFORMATION
Part Number Container Size
81464 (133MA) 12 oz. aerosol can
STORAGE
Products shall be ideally stored in a cool, dry location in
unopened containers at a temperature between 8
_
to 28
_
C
(46
_
to 82
_
F) unless otherwise labeled. Optimal storage is at
the lower half of this temperature range.
NOTE
The data contained herein are furnished for information only
and are believed to be reliable. We cannot assume
responsibility for the results obtained by others over whose
methods we have no control. Permatex, Inc. specifically
disclaims all warranties expressed or implied, including
warranties of merchantability or fitness for a particular
purpose, arising from sale or use of Permatex, Inc.
products and disclaims any liability for consequential or
incidental damages of any kind, including lost profits.
This product may be covered by one or more United States or
foreign patents or patent applications.