Specification Sheet

Toll Free: 87 PERMATEX
(877-376-2839)
10 Columbus Blvd., Hartford,
Connecticut 06106
6875 Parkland Boulevard, Solon
Ohio 44139
Technical Data Sheet
Permatex

Battery Protector &
Sealer
AAM Revised 10/02
NOT FOR PRODUCT SPECIFICATIONS.
THE TECHNICAL DATA CONTAINED HEREIN ARE INTENDED AS REFERENCE ONLY.
PLEASE CONTACT PERMATEX, INC., TECHNICAL SERVICE DEPARTMENT FOR ASSISTANCE AND RECOMMENDATIONS FOR YOUR SPECIFIC APPLICATION.
PERMATEX, INC., HARTFORD SQUARE NORTH, 10 COLUMBUS BOULEVARD, HARTFORD, CT 06106 PHONE – (1-87PERMATEX)
PRODUCT DESCRIPTION S.I.N.: 834-300
Permatex

Battery Protector & Sealer is an aerosol product for
sealing and coating the terminals of a battery and eliminating
the formation of acid salt corrosion that is typically found when
terminals are untreated.
PRODUCT BENEFITS
• Prevents terminal corrosion
• Prevents battery drain
• Increases battery life
• Improves electrical flow
TYPICAL APPLICATIONS
• Batteries
• Cables
• Terminals
DIRECTIONS FOR USE
1. Provide adequate ventilation.
2.
Clean parts to be treated with Permatex

Battery
Cleaner.
3. Shake can with ball agitator for one minute. For best
results, aerosol can should be at room temperature
before spraying.
4. Holding can 8 to 10 inches from the surface to be
coated, press the nozzle and discharge the product
onto the terminal areas. The product discharges as a
heavy film.
5. For best results, apply two light coats.
Note: Enough aerosol product to coat terminals on 25
batteries
For Cleanup
1. Turn can upside-down and spray to clear nozzle.
2. Clean hands with Permatex

brand hand cleaners.
PROPERTIES OF MATERIAL
Typical Value
Chemical Type Silicone grease
Appearance Purple film
Odor Solvent
Flash Point, Aerosol, contents under pressure,
consult MSDS
NFPA 704 Flammability Rating 4 (Highly flammable)
GENERAL INFORMATION
This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected
for use with chlorine or other strong oxidizing materials.
For safe handling information on this product, consult the
Material Safety Data Sheet, (MSDS).
ORDERING INFORMATION
Part Number Container Size
80370 (SA-9) 6 oz. aerosol can
STORAGE
Products shall be ideally stored in a cool, dry location in
unopened containers at a temperature between 8
_
to 28
_
C
(46
_
to 82
_
F) unless otherwise labeled. Optimal storage is at
the lower half of this temperature range.
NOTE
The data contained herein are furnished for information only
and are believed to be reliable. We cannot assume
responsibility for the results obtained by others over whose
methods we have no control. Permatex, Inc. specifically
disclaims all warranties expressed or implied, including
warranties of merchantability or fitness for a particular
purpose, arising from sale or use of Permatex, Inc.
products and disclaims any liability for consequential or
incidental damages of any kind, including lost profits.
This product may be covered by one or more United States or
foreign patents or patent applications.