Specification Sheet

Toll Free: 87 PERMATEX
(877-376-2839)
10 Columbus Blvd., Hartford,
Connecticut 06106
6875 Parkland Boulevard, Solon
Ohio 44139
Technical Data Sheet
Permatex



High Tack

 Gasket
Sealant
AAM Revised 09/06
NOT FOR PRODUCT SPECIFICATIONS.
THE TECHNICAL DATA CONTAINED HEREIN ARE INTENDED AS REFERENCE ONLY.
PLEASE CONTACT PERMATEX, INC., TECHNICAL SERVICE DEPARTMENT FOR ASSISTANCE AND RECOMMENDATIONS FOR YOUR SPECIFIC APPLICATION.
PERMATEX, INC., HARTFORD SQUARE NORTH, 10 COLUMBUS BOULEVARD, HARTFORD, CT 06106 PHONE – (1-87PERMATEX)
Permatex is a trademark of Illinois Tool Works, Inc.

2006. ITW Permatex, Inc. All rights reserved.
PRODUCT DESCRIPTION
Permatex

High Tack Gasket Sealant is a yellow colored
viscous liquid with a characteristic solvent odor which is a
blend of elastomers and resins that is brushable and dries
quickly to a highly tacky film. It is designed to seal or bond
rubber, cork, felt, paper and metal gaskets. It seals threaded
hose connections, waterproofs and protects electrical
terminals and wiring
PRODUCT BENEFITS
• Applies easily
• Fast drying
• Prevents seizing
• Assures correct gasket alignment
• Color coded for uniform application
• Allows easily disassembly
• Resists most automotive and industrial fluids
• Temperature Range - 65 º F to +500 º F
TYPICAL APPLICATIONS
• Gaskets
• Threaded connections
• Hose connections
• Weatherstripping
• Waterproofing for electrical terminals, spark plugs and
wires
• Rear axle assembly
• Tubeless tire beads
• Differential assemblies
• Filter line connections
• Terminal protector
DIRECTIONS FOR USE
1. Clean surfaces to remove all dirt, oil, rust, paints and
dried sealants. Keep surfaces dry and free from mold
release agents
2. Using brush, apply a thin, even coat on both surfaces to
be assembled.
3. Allow to set until solvent has evaporated and film is dry.
4. Assemble parts. Precoat gaskets or bolts for
convenience in assembling.
5. Remove with lacquer thinner.
PROPERTIES OF UNCURED MATERIAL
Typical Value
Chemical Type Elastomers and resins
Appearance Red liquid
Odor Ketonic
Specific Gravity 0.872
Viscosity Flow similar to SAE 40 Motor Oil
Flash Point, TCC 0ºF
GENERAL INFORMATION
This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected as
a sealant for chlorine or other strong oxidizing materials.
For safe handling information on this product, consult the
Material Safety Data Sheet, (MSDS).
ORDERING INFORMATION
Part Number Container Size
80062 (98H) 4 oz. can
80063 (98D) 16 oz. can
STORAGE
Products shall be ideally stored in a cool, dry location in
unopened containers at a temperature between 8° and 28°C
(46° and 82°F) unless otherwise labeled. Optimal storage is at
the lower half of this temperature range. To prevent
contamination of unused product, do not return any material to
its original container.
NOTE
The data contained herein are furnished for information only
and are believed to be reliable. We cannot assume
responsibility for the results obtained by others over whose
methods we have no control. Permatex, Inc. specifically
disclaims all warranties expressed or implied, including
warranties of merchantability or fitness for a particular
purpose, arising from sale or use of Permatex, Inc.
products and disclaims any liability for consequential or
incidental damages of any kind, including lost profits.
This product may be covered by one or more United States or
foreign patents or patent applications.