Other Content

Toll Free: 87 PERMATEX
(877-376-2839)
10 Columbus Blvd., Hartford,
Connecticut 06106
6875 Parkland Boulevard, Solon
Ohio 44139
Technical Data Sheet
Permatex

Prussian Blue
AAM Revised 10/02
NOT FOR PRODUCT SPECIFICATIONS.
THE TECHNICAL DATA CONTAINED HEREIN ARE INTENDED AS REFERENCE ONLY.
PLEASE CONTACT PERMATEX, INC., TECHNICAL SERVICE DEPARTMENT FOR ASSISTANCE AND RECOMMENDATIONS FOR YOUR SPECIFIC APPLICATION.
PERMATEX, INC., HARTFORD SQUARE NORTH, 10 COLUMBUS BOULEVARD, HARTFORD, CT 06106 PHONE – (1-87PERMATEX)
PRODUCT DESCRIPTION S.I.N.: 834-300
Permatex
®
Prussian Blue is a non-drying blue, oily paste type
pigment designed to identify points of interference and high
spots on precision parts to be fitted. It speeds tracing and
precision fittings of close tolerance assemblies. Makes
improper fitting high spots immediately visible as bright blue
streaks.
PRODUCT BENEFITS
• Simple to apply
• Improper fitting spots immediately visible
• Non drying
• Easy clean-up
TYPICAL APPLICATIONS
• Bearings
• Valves
• Gears
• other close tolerance or machined assemblies
DIRECTIONS FOR USE
1. Coat parts with a uniform film of Prussian Blue.
2. Assemble in working position, turn shaft.
3. Improper fitting will show up as a definite, easy-to-see,
bright blue streak.
4. Correct the seating of the assembly.
5. Wipe clean.
PROPERTIES OF UNCURED MATERIAL
Typical Value
Chemical Type Paraffinic hydrocarbon
Appearance Blue, oily paste
Odor Petroleum
Specific Gravity 0.88
Flash Point, TCC,
_
C (
_
F) > 93 (200)
GENERAL INFORMATION
This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected
for use with chlorine or other strong oxidizing materials.
For safe handling information on this product, consult the
Material Safety Data Sheet, (MSDS).
ORDERING INFORMATION
Part Number Container Size
80038 (35V) .75 fl. oz. tube
STORAGE
Products shall be ideally stored in a cool, dry location in
unopened containers at a temperature between 8
_
to 28
_
C
(46
_
to 82
_
F) unless otherwise labeled. Optimal storage is at
the lower half of this temperature range. To prevent
contamination of unused product, do not return any material to
its original container.
NOTE
The data contained herein are furnished for information only
and are believed to be reliable. We cannot assume
responsibility for the results obtained by others over whose
methods we have no control. Permatex, Inc. specifically
disclaims all warranties expressed or implied, including
warranties of merchantability or fitness for a particular
purpose, arising from sale or use of Permatex, Inc.
products and disclaims any liability for consequential or
incidental damages of any kind, including lost profits.
This product may be covered by one or more United States or
foreign patents or patent applications.