Specification Sheet

Toll Free: 87 PERMATEX
(877-376-2839)
10 Columbus Blvd., Hartford,
Connecticut 06106
6875 Parkland Boulevard, Solon
Ohio 44139
Technical Data Sheet
Permatex

Pneumatic/Hydraulic
Sealant
AAM Revised 11/02
NOT FOR PRODUCT SPECIFICATIONS.
THE TECHNICAL DATA CONTAINED HEREIN ARE INTENDED AS REFERENCE ONLY.
PLEASE CONTACT PERMATEX, INC., TECHNICAL SERVICE DEPARTMENT FOR ASSISTANCE AND RECOMMENDATIONS FOR YOUR SPECIFIC APPLICATION.
PERMATEX, INC., HARTFORD SQUARE NORTH, 10 COLUMBUS BOULEVARD, HARTFORD, CT 06106 PHONE – (1-87PERMATEX)
PRODUCT DESCRIPTION S.I.N.: 834-300
Permatex

Hydraulic/Pneumatic Sealant is a single
component, high viscosity anaerobic pipe sealant material.
The product cures when confined in the absence of air
between close fitting metal surfaces. Permatex

Hydraulic/Pneumatic Sealant locks and seals high-pressure
fluid power systems with tapered fittings.
PRODUCT BENEFITS
• Contains no fillers or particles
• Will not contaminate fluid systems
• Will not foul valves
• Will not clog fine filters and screens
• Has excellent solvent resistance
• Easy disassembly
TYPICAL APPLICATIONS
• Hydraulic line fittings
• Brake fittings
• Transmission fluid fittings
• PTO fittings
• Air conditioning fittings
DIRECTIONS FOR USE
1. Shake container well before using.
2. Clean surfaces to be sealed with Permatex

Brake &
Parts Cleaner.
3. Twist off white overcap and snip nozzle to desired size
opening.
4. Apply sealant to male threads in a sufficient quantity to fill
all engaged threads.
5. Assemble and wrench tighten.
6. This product works best in thin bond gaps.
7. Very large thread sizes may create large gaps which will
affect cure speed and strength.
8. Parts may be returned to service in four (4) hours when
cured at 75°F.
For Cleanup
1. Wipe off any material outside the joint with a dry cloth.
2.
Clean hands with Permatex

Fast Orange
®
hand cleaner
or soap and water.
PHYSICAL PROPERTIES
Typical Value
Chemical Type Methacrylate ester
Appearance Purple liquid
Odor Acrid
Specific Gravity 1.20
Viscosity (cP) 14,000
Flash Point (T.C.C.) °F >200
CURED INFORMATION
(Cured 24 hours @ 75°F)
Pressure Resistance (psi) 10,000
Temperature Range, °F -65 to +300
Breakaway torque (in.-lb.) 15
GENERAL INFORMATION
This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected as
a sealant for chlorine or other strong oxidizing materials.
For safe handling information on this product, consult the
Material Safety Data Sheet, (MSDS).
ORDERING INFORMATION
Part Number Container Size
54540 36 ml. bottle
STORAGE
Products shall be ideally stored in a cool, dry location in
unopened containers at a temperature between 8°
to 28°C
(46°
to 82°F) unless otherwise labeled. Optimal storage is at
the lower half of this temperature range. To prevent
contamination of unused product, do not return any material to
its original container.
NOTE
The data contained herein are furnished for information only
and are believed to be reliable. We cannot assume
responsibility for the results obtained by others over whose
methods we have no control. Permatex, Inc. specifically
disclaims all warranties expressed or implied, including
warranties of merchantability or fitness for a particular
purpose, arising from sale or use of Permatex, Inc.
products and disclaims any liability for consequential or
incidental damages of any kind, including lost profits.
This product may be covered by one or more United States or
foreign patents or patent applications.