Specification Sheet

Technical Data Sheet The Right Stuff

Permatex, Right Stuff, PowerBead and Fast Orange are trademarks of Permatex, Inc. © 2006 All rights reserved
method or using the included plastic cap.
PROPERTIES OF UNCURED MATERIAL
Typical Value
Chemical Type Elastomeric Rubber
Appearance Metallic Black
Specific Gravity @ 20°C
1.31
Viscosity Thixotropic Paste
Flash Point (TCC), °F
>200
TYPICAL CURING PERFORMANCE
Cure Time
The surface of this adhesive becomes dry to touch on
exposure to atmospheric moisture within 15 minutes at 23±
2°C, 50 ± 5% RH. The product cures on exposure to moisture
in the air and dries tack free in two hours, with full cure in 24
hours. Cure times will vary with temperature, humidity and
gap.
Instant Seal
Parts assembled with PERMATEX
®
The Right Stuff

are
instantly sealed and can be immediately placed into service.
TYPICAL PROPERTIES OF CURED MATERIAL
Typical Value
Hardness, Shore A, ASTM D2240 30 ± 5
Elongation at break, %, ASTM D412 550
Tensile strength, N/mm
2
, ASTM D412 1.4 min
PERFORMANCE OF CURED MATERIAL
(After 21 days @ 23±2°C, 50±5% RH at 0.5mm gap)
Isopropyl Alcohol wiped substrates
Typical
Value Range
Shear Strength, ASTM D1002, DIN 53283
Mild steel, N/mm
2
1.2 1.0 to 1.4
(psi) (150) (150 to 200)
Aluminum (T2024), N/mm
2
1.0 0.7 to 1.3
(psi) (150) (100 to 190)
Aluminum (Alclad), N/mm
2
1.3 1.0 to 1.5
(psi) (180) (150 to 220)
Zinc Dichromate, N/mm
2
1.3 1.0 to 1.5
(psi) (180) (150 to 220)
TYPICAL ENVIRONMENTAL RESISTANCE
Temperature Resistance
Typical Values
Continuous, °C (°F)
-59 to 232 (-75 to 450)
Intermittent, °C (°F)
-59 to 260 (-75 to 500)
Chemical / Solvent Resistance
The product retains effective properties in contact with
automotive fluids, such as motor oil, transmission fluids,
alcohol and antifreeze solutions. Note: Not recommended for
parts in contact with gasoline.
GENERAL INFORMATION
This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected as
a sealant for chlorine or other strong oxidizing materials.
For safe handling information on this product, consult the
Material Safety Data Sheet, (MSDS).
ORDERING INFORMATION
Part Number Container Size
25223 4 oz. auto. tube
25224 7 oz. auto. tube
25229 3 oz. auto. tube, carded
33694 10.1 fl. oz. cartridge
29208 5 oz. cartridge
85224 7.5 oz. PowerBead
99070 5 oz. cartridge, 2 pack with caulking gun
800368 Short caulking gun
STORAGE
Product shall be ideally stored in a cool, dry location in
unopened containers at a temperature between 8°C to 28°C
(46°F to 82°F) unless otherwise labeled. Optimal storage is
at the lower half of this temperature range.
DATA RANGES
The data contained herein may be reported as a typical value
and/or range. Values are based on actual test data and are
verified on a periodic basis.
NOTE
The data contained herein are furnished for information only
and are believed to be reliable. We cannot assume
responsibility for the results obtained by others over whose
methods we have no control. Permatex, Inc. specifically
disclaims all warranties expressed or implied, including
warranties of merchantability or fitness for a particular
purpose, arising from sale or use of Permatex, Inc.
products and disclaims any liability for consequential or
incidental damages of any kind, including lost profits.
This product may be covered by one or more United States or
foreign patents or patent applications.