Specification Sheet

Toll Free: 87 PERMATEX
(877-376-2839)
10 Columbus Blvd., Hartford,
Connecticut 06106
6875 Parkland Boulevard, Solon
Ohio 44139
Technical Data Sheet
Permatex

BODY SHOP

Heavy
Duty Headliner & Carpet
Adhesive
AAM Revised 11/02
NOT FOR PRODUCT SPECIFICATIONS.
THE TECHNICAL DATA CONTAINED HEREIN ARE INTENDED AS REFERENCE ONLY.
PLEASE CONTACT PERMATEX, INC., TECHNICAL SERVICE DEPARTMENT FOR ASSISTANCE AND RECOMMENDATIONS FOR YOUR SPECIFIC APPLICATION.
PERMATEX, INC., HARTFORD SQUARE NORTH, 10 COLUMBUS BOULEVARD, HARTFORD, CT 06106 PHONE – (1-87PERMATEX)
PRODUCT DESCRIPTION S.I.N.: 834-300
Permatex

BODY SHOP

Heavy Duty Headliner & Carpet
Adhesive is a high-strength and high temperature spray
adhesive designed for repairing interior parts that have
become detached or loosened. It is especially effective in
repairing automotive headliners where standard spray
adhesives fail. This is due to the high strength and
temperature resistance of the product.
PRODUCT BENEFITS
• Maintains high strength at temperatures up to
170°F(77°C)
• Resistant to extreme weather conditions
• Water resistant
• Dries clear
• VOC compliant
TYPICAL APPLICATIONS
• Headliners
• Carpets
• Trunk linings
• Door panels
• For use on foam, fabrics, plastics and rubber
DIRECTIONS FOR USE
1. Make sure all surfaces are clean, dry and free from any
contaminates.
2. Shake can before use.
3. Turn nozzle to select spray pattern width; low medium or
high.
4. Hold can 6 to 8 inches from work surface and apply 2 to
3 uniform overlapping coats. Allow a minimum of 5
minutes drying time between coats. Apply additional
coats in opposite direction from the first. For stronger
bonds, apply adhesive to both surfaces.
5. Allow adhesive to dry for at least 5 minutes, or until
tacky, before setting.
6. Press surfaces together with uniform pressure,
eliminating air pockets. Bonds should be made within
30 minutes of application.
7. To prepare can for next use, invert and dispense until
spray is free of adhesive.
For Cleanup
1. Clean hands with a dry cloth or Permatex

Fast
Orange

hand cleaner.
PROPERTIES OF UNCURED MATERIAL
Typical Value
Chemical Type SIS Copolymer
Appearance Aerosol spray
Odor Solvent
Flash Point Aerosol, contents under pressure,
consult MSDS
TYPICAL ENVIRONMENTAL RESISTANCE
Temperature Resistance (max)
Typical Values
Continuous, °C (°F) 71 (160)
Chemical / Solvent Resistance
The product retains effective properties in contact with
automotive fluids, such as motor oil, transmission fluids,
alcohol and antifreeze solutions. Note: Not recommended for
parts in contact with gasoline.
GENERAL INFORMATION
This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected as
a sealant for chlorine or other strong oxidizing materials.
For safe handling information on this product, consult the
Material Safety Data Sheet, (MSDS).
ORDERING INFORMATION
Part Number Container Size
27828 20 oz. aerosol can
STORAGE
Products shall be ideally stored in a cool, dry location in
unopened containers at a temperature between 8°
to 28°C
(46°
to 82°F) unless otherwise labeled. Optimal storage is at
the lower half of this temperature range. To prevent
contamination of unused product, do not return any material to
its original container.