SDS

Material Safety Data Sheet
1. PRODUCT IDENTIFICATION
Product Name: 14600 COLD WELD BONDING COMPOUND 1 OZ. PART 1 RESIN
Item No: VC0075A
Product Type: Epoxy resin
2. COMPOSITION/INFORMATION ON INGREDIENTS
Component Weight% ACGIH; TLV-TWA OSHA PEL
LIMESTONE
1317-65-3
>50 Not listed 15 mg/m
3
BISPHENOL A/EPICHLOROHYDRIN
BASED EPOXY RESIN
25068-38-6
30-60 Not listed Not listed
TREATED SILICON DIOXIDE,
SYNTHETIC, CRYSTALLINE-FREE
67762-90-7
<5 10 mg/m
3
Not listed
BENZYL ALCOHOL
100-51-6
<5 Not listed Not listed
3. HAZARDS IDENTIFICATION
Toxicity:
May cause moderate eye irritation. May cause moderate skin irritation. May cause skin sensitization. May
cause gastrointestinal irritation. Causes respiratory irritation..
Primary Routes of Entry:
Eye and skin contact, ingestion, inhalation
Signs and Symptoms of Exposure:
May cause pain, redness or swelling of the eyes and excessive blinking and tear production. Skin redness.
Repeated skin contact may cause allergic skin reactions. Excessive accidental exposure may cause
headache, dizziness, nausea and mild respiratory irritation.
Component Weight% NTP ACGIH Carcinogens
IARC
BENZYL ALCOHOL
100-51-6
<5 male rat-no evidence;
female rat-no
evidence; male mice-
no evidence; female
mice-no evidence
Medical Conditions Recognized as
Being Aggravated by Exposure:
Preexisting eye, skin and respiratory disorders may be aggravated by overexposure to this product.
4. FIRST AID MEASURES
Ingestion:
Do not induce vomiting. Slowly dilute with 1-2 glasses of water or milk and seek medical attention. Never
give anything by mouth to an unconscious person.
Inhalation:
Move to fresh air in case of accidental inhalation of vapors. Oxygen or artificial respiration if needed.
Obtain medical attention.
Skin Contact:
In case of contact, immediately flush skin with plenty of soap and water for at least 15 minutes. Get
medical attention.
Eye Contact:
In case of contact, immediately flush eyes with plenty of water for at least 15 minutes and get medical
attention if irritation persists.
5. FIRE FIGHTING MEASURES
Flash Point °F(C°):
>400°F (204°C) PMCC
Recommended Extinguishing Media:
Carbon Dioxide, Dry Chemicals, Foam.
Special Fire-Fighting Procedures:
Firefighters shoud wear self-contained breathing apparatus and protective
clothing to prevent all skin and eye contact. Cool closed containers exposed
to fire with water spray.
Hazardous Products of Combustion:
Oxides of carbon, Aldehydes, Acid vapours
1 of 3
Permatex, Inc.
10 Columbus Blvd.
Hartford, CT 06106 USA
Telephone: 1-87-Permatex
[phone]
Emergency: 800-255-3924 (ChemTel)
International Emergency: +01-813-248-0585