Use and Care Guide

HL-20181 OOS}t&-2
AS
CARE AND MAINTENANCE:
Before using, clean the cooler completely with a soft dry towel,
take off the lid and put drinks and ice into the cooler.
Drain away all the water in the cooler, clean and dry the cooler
completely with a soft towel after use.
Indoor storage preferred while not in use.
IMPORTANT
Please take time to read these instructions thoroughly and follow each step carefully for
safe and easy operation. Keep this manual for future reference.
PARTS LIST
:::::.---== ~ -:tt ~~~-E
D ~ ·
, . ..., ,------F
K-------
Item Description Qty
A Lid handle 2
B Lid 1
C Short Body handle 1
D
Long Body handle
1
E
Body
1
F
Bottle Opener
1
G
Bottle Cap Catcher
1
H
Leg
4
I
Bottom Shelf
1
J
Wheels (2With Brake, 2Without Brake)
4
K
Water Drain Plug Assembly
1
AA M6X16 Hex Bolt 8
BB M6X16 Hex Socket Bolt 14
cc
M6X16 Shoulder Bolt 2
DD M5X35 Screw 2
Owner's Manual
CONTACT US
Questions? Need parts?
We are here to help!
Permasteel Customer Service
Tel: [phone]
Fax: [phone]
Email: [e-mail]
Monday-Friday
8:00am-5:00pm (Pacific Standard Time)
80QT PATIO COOLER
MODEL#PS-206-SS 2
Fig. 1 Fig. 2
AA
~
I · -- H
E
Step1:
Connect 4 Legs (H) with Body (E) by bolt (AA).
Connect 4 Legs(H)and Bottom Shelf (l).Then
connect 4 Wheels (J)and legs(H).(Do not full y
tighten the bolts now).
Fig. 3
BB
E
C
Step 3:
Connect 2 Body Handles(C&D)and Body (E)by
Bolt(BB)(Pre-a ss embled on E). Then fully
tighten.
Fig. 5
Fig. 4
Step 4:
BB
F
E
cc
G
Connect Bottle Opener(F) and body (E) by bolt (BB)
and fully tighten . Insert Bottle Cap
Catcher (G) with
Bolt (CC) pre-installed
on Body (E).
DD
Step 5:
Connect Lid Handle(A) and Lid (B) by Screw (DD)
(Preassembled
on B).Then fully tighten. Your cooler is
now reach for use.