Instructions / Assembly

Table Of Contents

Step 2:

• Attach the bottom shelf (H) to the legs (G) with (4) M8x16mm hex socket bolts (AA) and

(4) M8 washers (EE).

Note: Do not fully tighten the bolts. Legs and bottom shelf should be loose so that it can be aligned

with the holes for the casters.

• Insert and thread casters (I) through the two legs and into the bottom panel holes on the same side.

• Insert and thread casters (J) through the other two legs and into the bottom panel holes on the

same side.

• Now, tighten all the bolts left loose from step 1.

#6 Allen Wrench