Warranty
Table Of Contents
- Warning
- ASSEMBLY INSTRUCTIONS
- Installation Hardware:
- INSTALLATION INSTRUCTIONS
- CLEANING AND MAINTENANCE
- Troubleshooting:
- A) When heater will not turn on:
- 1. Check if the power cord is plugged into an electrical outlet, if not, plug it in.
- 2. Make sure power outlet has power running through it.
- B) LED light is on but no heat.
- Limited Warranty:
- Limitation of Remedies and Liability:
INSTALLATION INSTRUCTIONS
Tools Needed:
• Pencil
• Hammer
• Level
• Screw-Driver
• Power Drill
• Drill Bits
A wall mounting bracket & hardware is provide with the heater which has been specifically designed to allow
this product to be Mounted to a wall or ceiling. Before drilling holes on the wall/ceiling, make sure the wall is a
solid structure and that there are no hidden water pipes or electric wires. The heater must be installed no less
than 16 Inches form side walls and no less than 6 feet off the floor.
Important: Ensure that the supply cables do not come into contact with the reflector of the heater or it is does
not near the heated area. The power cable can be tied to the metal mounting bracket behind the heater with
plastic zip ties.