Warranty
Table Of Contents
- Warning
- ASSEMBLY INSTRUCTIONS
- Installation Hardware:
- INSTALLATION INSTRUCTIONS
- CLEANING AND MAINTENANCE
- Troubleshooting:
- A) When heater will not turn on:
- 1. Check if the power cord is plugged into an electrical outlet, if not, plug it in.
- 2. Make sure power outlet has power running through it.
- B) LED light is on but no heat.
- Limited Warranty:
- Limitation of Remedies and Liability:
ASSEMBLY & OPERATION INSTRUCTION
Please read carefully and Save this instruction for future reference
Introduction
The infrared heater contains a gold halogen lamp formed reflector heating system that provides even heat
distribution.
The infrared heater saves 30%-40% of electricity in comparison to traditional heaters. The infrared heater is
commonly used for indoor or outdoor spot heating. Perfect for garages, outdoor patios, indoor pools or
workshops.
Warning
READ CAREFULLY-The infrared heater is designed for safe operation. Nevertheless, installation,
maintenance and operation of the heater can be dangerous. Observing the following procedures will
reduce the risk of fire, electric shock, injury to person and keep installation time to a minimum. Save
these instructions for future reference.
1. Read instruction carefully & thoroughly before using this heater.
2. Remove the unit form its packaging and check to make sure it is in good condition before using.
3. Do not let children play with parts of the package. (such as plastic bags)
4. Check the household voltage to ensure it matches the heater’s rated specification.
5. Check the power cord and plug carefully before use, to make sure that they are not damaged.
6. Before unplugging the power cord, be sure to turn off the power switch, when turning unit
on, be sure your hands are dry to prevent electric shock.
7. Do not use flammable objects near or point the heater directly at furniture, pillows. bedding,
paper, cloth and curtains. Keep these items at least 3 feet (1 meter) form the front of the heater and
keep flammable items away from the heater.
8. Do not use near or in the immediate vicinity of a hot-tub or swimming pool or any source of liquid.
9. To protect against electric shock, do not immerse power cord or plug in water or any other liquid.
10. Do not insert or allow foreign objects to enter any ventilation or exhaust opening, as this may
cause an electric shock, fire or damage to the heater.
11. Always unplug the heater when not in use.
12. Do not allow cord to overhang where it can be easily pulled by children.