Warranty

REMOTE CONTROL INSTRUCTION
OPERATING
Product Key Function:
1. Turn ON/OFF the power
2. Press key function: press the button, then press the heat levels (L1-L2-standby - off)
MOTED: All Permasteel heaters and their remote controls have the same frequency, so it is possible to
control several heaters with just one remote.
PUSH BUTTON: on the right side of the heater, the heater can be operated manually without the remote
control.
Inserting Batteries (not included)
• Insert 2 AAA / Alkaline type batteries into your remote control
1. Open Battery cover on the remote control, insert batteries in accordance with the instructions and
polarity of the batteries.
2. Replace batteries in the same way depicted above.
FUNCTION & OPERATION
PLUG the unit into a 110V 3 prong power Outlet socket, make sure the power supply is the same as rated.
Manually turn on:
1. Make sure heater is plugged into power outlet.
2. Press the power button on side of heater Housing. This will put heater on standby.
3. One click will put the heater on LOW setting
4. Two clicks will put the heater on HIGH setting
Remote control operation.
1. Make sure heater is plugged into power outlet.
2. Click on power button on remote control
3. Adjust power settings by clicking the corresponding buttons LOW or HI
Remote Control Function
Button
Function (Heater On)
Function (Heater Off)
LED Display
on
Heater
O
Power on & off
I
Low setting
Turns heater on to
Level
1 (50%*power)
II
Hi setting
Turns heater on to
Level
2 (100%*power)