User Manual
Section A: Specifications 4
A: SPECIFICATIONS
Model Specifications
Model
Standard
Capacity
Heat Exchangers
Passive Active
Dimensions
Weight
Power
Supply
e5300
0-3 LPM
0-6 SCFH
1x5 in.
1x5 in.
11 x 7 x 11 in. HWD
29 x 18 x 29 cm HWD
20 lbs
9 kg
100W
e5400
3-4 LPM
6-8 SCFH
2x5 in.
11 x 7 x 11 in. HWD
29 x 18 x 29 cm HWD
20 lbs
9 kg
240W
e5500
4-7 LPM
8-15 SCFH
1x10 in.
1x10 in.
14 x 13 x 13 in. HWD
36 x 33 x 33 cm HWD
37 lbs
17 kg
240W
e5500XP
4-7 LPM
8-15 SCFH
1x10 in.
1x10 in.
14 x 13 x 13 in. HWD
36 x 33 x 33 cm HWD
39 lbs
18 kg
240W
e5800
7-10 LPM
15-21 SCFH
2x10 in.
14 x 13 x 13 in. HWD
36 x 33 x 33 cm HWD
37 lbs
17 kg
500W
e5800XP
7-10 LPM
15-21 SCFH
2x10 in.
14 x 13 x 13 in. HWD
36 x 33 x 33 cm HWD
39 lbs
18 kg
500W
e5900
10-20 LPM
21-42 SCFH
2x10 in.
2x10 in.
14 x 13 x 13 in. HWD
36 x 33 x 33 cm HWD
39 lbs
18 kg
500W
e5900XP
10-20 LPM
21-42 SCFH
2x10 in.
2x10 in.
14 x 13 x 13 in. HWD
36 x 33 x 33 cm HWD
41 lbs
19 kg
500W
General Specifications
Digital Boards
Main control board
Water slip alarm relay board
LAN card (optional)
Filter probe & heated sample line accessory
board (optional)
Heat exchanger thermocouple isolated output
board (optional)
Alarms
Probe over / under temperature
Heated sample line over / under temperature
Cooler over temperature
Cooler thermocouple failure
Water slip (moisture carryover)
Display
Jumbo dual-line LCD
LED red, amber, green heat exchanger status
indicators
Heat Exchanger
Type
EZ-Clean™ twist apart
Heat Exchanger
Material
Stainless steel (standard); Durinert
®
treated
stainless steel, Kynar
®
, Glass (optional)
Heat Exchanger
Connections
1/4” FNTP Inlet (first heat exchanger)
1/8” FNTP Outlet
3/8” FNTP Drain
Heat Sink
High heat transfer aluminum
Voltage
110/120 VAC, 220/240 VAC, 12 VDC, 15 VDC,
24 VDC
Digital Board Specifications
Main Control Board
4 thermocouple inputs
4 analog outputs
Water Slip Alarm Relay
Board
2 water slip (moisture carryover) inputs
2 high current digital contact outputs
2 digital PLC outputs
LAN card (optional)
Modbus or TCP/IP
RJ45 / CAT 5 cable
Filter Probe & Heated
Sample Line Accessory
Board (optional)
2 thermocouple inputs
Pulse width modulated digital output
Heat Exchanger
Thermocouple Isolated
Output Board (optional)
2 thermocouple inputs
2 x 4-20mA outputs
2 x 0-10VDC outputs
Operating Specifications
Maximum Inlet Sample
Temperature
400F (205C) SS, Durinert
®
, Glass Impingers
280F (138C) Kynar
®
Impingers
Maximum Inlet Pressure
45 psig
3 bar / 2250 mmHg
Maximum Heat Exchanger
Pressure Drop
<+1 in. H2O
Ambient Temperature
Range
33-104F
0.6-40C
Outlet Sample Gas Dew
Point
41F
5C