Installation Instructions

PERLICK RESIDENTIAL RS-CDK INSTALLATION INSTRUCTIONS
perlick customer service [phone] | 7
INSTALLATION
2. Removeair“T”fromendofairtubebylooseningfastenerholdingthetwohalvestogether.Removetheairtubefromthe
towerbeingcarefulnottodamagetheproducttube.
3. Cutairtubeatmarkmadeinstep1.Re-installairtubeintotowerandre-install“T”ontheendoftheairtubeso“T”facesthe
rearofthetower.
4. Cutproducttube3inchesbelowthe“T”andinstallincludedbarbedunionintoproducttubeandclampusingwormdrive
clamp.
Figure 3.
Figure 4.