Installation Instructions

PERLICK RESIDENTIAL RS-CDK INSTALLATION INSTRUCTIONS
perlick customer service [phone] | 11
INSTALLATION
Locatethefaucetandinstallontothedispensingheadshanks.
Tightenwithsuppliedspannerwrench.Installblackhandle(s)
ontofaucet(s).
11.
Nitrogen tanks are shipped empty and must belled prior
to use. Turn the adjusng knob on the regulator counter-
clockwise unl the secondary gauge (top) reads zero.
Make sure that the valve at the boom of the regulator
where the red hose is connected is in the o posion as
shown. Watching the secondary pressure gauge, turn the
regulator adjusng knob clockwise unl the pressure is at
15psig.Adjustmentscanlaterbemadebasedonowrates.
IMPORTANT:AllpressureadjustmentsMUSTbemadewhen
theshut-ovalveisintheOFFposion!
10.