Installation Instructions

PERLICK RESIDENTIAL UNDERCOUNTER INSTALLATION MANUAL
Perlick customer service [phone] | 13
5. Loosely attached the four corners of the overlay
panel with the door frame with #10 x 3/4” wood
screws.
6. Make sure the overlay panel is aligned properly with
the door.
7. After alignment is satised, fasten down all screws
through the screw holes.
8. When re-installing the gasket, make sure the dart is
pressed inside the slot on the door frame. Start at
the four corners and rmly press your way inwards.
CAUTION
Do not overtighten wood overlay
attachment screws, as this may
damage the factory supplied door frame.