Luxury Operation & Installation Manual Signature Series (HP15 model) Excludes Beer Dispenser Models HP15RS HP15BS HP15WS Form No. Z2305 Rev.
Operation & Installation Manual Signature Series (HP15 model) Table of Contents Introduction........................................................................................................... 3 Warranty Registration...................................................................................... 3 General Precautions.......................................................................................... 4 Installation Specifications............................................................
Operation & Installation Manual Signature Series (HP15 model) GENERAL PRECAUTIONS DANGER Risk of child entrapment, before you throw away your old refrigerator or freezer, take off the doors and leave shelves in place so that children may not easily climb inside. DANGER Altering, cutting of the power cord, or removal of the power cord, removal of power plug, or direct wiring can cause serious injury, fire and/or loss of property and/or life and will void the warranty.
Signature Series HP15HP15 Models Signature Series Models 50" Area in which50" Area in which electrical outlet must be located electrical outlet must be located 1 1 5 16" 5 16" Operation & Installation Manual Signature Series (HP15 model) Power cord 65/8" off floor.* Power cord 65/8" off floor.* 1 HP15 Models 1 1 1 4" Min. 1 4" Min. clearance from clearance from a corner to a corner to acheive 90 acheive 90 door swing. door swing.
Operation & Installation Manual Signature Series (HP15 model) PREPARING THE SPACE Make sure that the space that the opening where the Perlick cabinet(s) is/are to be installed is properly prepared. Refer to Figures 1 and 2 on page 5 to ensure proper space dimensions and electrical service are correct for the model to be installed.
Operation & Installation Manual Signature Series (HP15 model) ANTI-TIP BRACKETS WARNING Unit may tip forward if loaded racks/shelves are all pulled out at the same time. To prevent tipping and provide a stable installation, the unit must be secured in place with the anti-tip brackets provided with the unit. A set of metal anti-tip brackets and necessary hardware is supplied with the unit. The anti-tip brackets, when properly installed, should secure the rear legs and prevent the unit from tipping forward.
Operation & Installation Manual Signature Series (HP15 model) 5. Shim the front of the unit so the front face is flush with the surrounding cabinetry. Adjust the front legs to support the countertop at the shimmed height. Using an adjustable wrench or pliers, turn the legs counterclockwise to raise the unit or clockwise to lower the unit. Countertop should be resting on top of the unit.
A B C 9 SW 7/8" 7/64" 9/32" 1/4" 1/2" 1/8" 7/64" 9/32" 3/32" 7 1/16" 1/32" THICK (20GA) GALVANIZED OR STAINLESS STEEL RECOMMENDED REAR VIEW R1/4" FRONT VIEW 3/4" C 1 29/32" 17/64" 4 1/8" 3/8" SECTION B-B SCALE 1 : 2 9/32" 1/32" 2 2 7/64" 5/32" 29/64" 1/4" TYPICAL 1" DETAIL D SCALE 1 : 1 11/16" 3/8" DETAIL C SCALE 1 : 2 3" TYPICAL 3/32" 1" 5/16" TYPICAL CHECKED DRAWN FINISH: QTY.
Operation & Installation Manual Signature Series (HP15 model) Adjusting Full-extension Shelving 1. Pull the shelf out to its farthest position. Locate the tabs in the middle of both extenders (Figure 7). Lift one tab up while pushing the opposite tab down and pull shelf out. Figure 7- Tab location 2. Reposition each bracket separately. Grasp the middle of the bracket, pull the front end up and out, then forward to remove (Figure 8). 3. Place bracket at the desired position.
Operation & Installation Manual Signature Series (HP15 model) DOOR OPTIONS Perlick residential units offer a variety of door panel design alternatives; solid stainless steel, solid wood overlay, glass with stainless steel trim and glass with wood overlay trim. Solid stainless steel and stainless steel glass doors are shipped from the factory with decorative stainless steel panels and handles in place on the appliance.
Operation & Installation Manual Signature Series (HP15 model) Figure 10 - Solid wood overlay panel template 12
Operation & Installation Manual Signature Series (HP15 model) Figure 11- Glass wood overlay panel template 13
Operation & Installation Manual Signature Series (HP15 model) Figure 12 - Wood overlay drawer panel template 14
Operation & Installation Manual Signature Series (HP15 model) Figure 13 - Lock installation, solid wood overlay door panel 15
Operation & Installation Manual Signature Series (HP15 model) Figure 14 - Lock installation, wood overlay glass door panel 16
Operation & Installation Manual Signature Series (HP15 model) Figure 15 - Lock installation, wood overlay drawer panel 17
Operation & Installation Manual Signature Series (HP15 model) Handle Installation WOODEN WINE RACK TRIM FINISHING (optional) CAUTION Handle mounting on wood overlay door should be mounted on overlay panel only (not the door) to avoid damage to the factory door. All wine racks come with sleek stainless steel fronts. Unfinished solid hardwood fronts are optional and can be removed and replaced with other wood to match your cabinetry. See Figure 16 (below) for wine rack face details. 1.
Operation & Installation Manual Signature Series (HP15 model) OPERATION General The unit is equipped with a state-of-the-art refrigeration system. The cabinet is equipped with an adjustable digital temperature controller and LED display. Interior Light The unit is equipped with an interior light that illuminates when the door is open. The cabinet also comes standard with a manual light switch located on the control box for displaying your products through a glass door.
Operation & Installation Manual Signature Series (HP15 model) TEMPERATURE CONTROLLER (not engaged) © 2011 24”, 48” & 72” Cabinet Installation / Operation Manual 20 Document No.
Operation & Installation Manual Signature Series (HP15 model) IMPORTANT NOTE: Dependent on the mode and configuration, the controllers have been programmed to only allow a temperature adjustment within a specified range. See chart below for the specified range allowed for your cabinet: HP15 Models Description Model No.
Operation & Installation Manual Signature Series (HP15 model) TROUBLESHOOTING BEFORE CALLING FOR SERVICE: If the unit appears to be malfunctioning, read through NORMAL OPERATION first. If the problem persists, check the TROUBLESHOOTING GUIDE. Locate the problem in the guide and refer to the cause and its remedy before calling for service. The problem could be something which can be solved without a service call.
Operation & Installation Manual Signature Series (HP15 model) Problem: The refrigerated compartment is warmer than usual • Is your control set properly? • Is the light staying on? • Is your condenser area clean and free of obstructions? • Has the door been open for a long time or more frequent door openings occured? • Are the internal louvers and fan guard openings obstructed? • Has warm product been placed in the cabinet? Problem: The refrigeration system runs for long periods of time • Is the conde
Operation & Installation Manual Signature Series (HP15 model) RESIDENTIAL PRODUCTS WARRANTY 1A. PERLICK RESIDENTIAL REFRIGERATION PRODUCTS LIMITED WARRANTY (excludes H50IM Clear Ice Makers; see warranty on page 31) ENTIRE PRODUCT - Full Three Year Warranty*: For three (3) years from date of original purchase, Perlick Corporation’s warranty covers all parts and labor to repair or replace any part of the product, which proves to be defective in material and workmanship.
Operation & Installation Manual Signature Series (HP15 model) Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary, from state to state. 1B.
Form No. Z2305 Rev. 08/07/2012 8300 West Good Hope Road • Milwaukee, WI 53223 • Toll Free 800.558.5592 • Fax 414.353.7069 • www.bringperlickhome.
