User and Care Guide
PERLICK RESIDENTIAL UNDERCOUNTER REFRIGERATION USE & CARE GUIDE
perlick customer service (800)558-5592 | 7
TOUCH-SCREEN CONTROL OPERATION - REFRIGERATOR MODELS
Signature Series – HP15 Models
Model Min Temp Set Max Temp Set
HP15R 33° F 42° F
HP15B 33° F 48° F
HP15W 45° F 65° F
HP15T 33° F 42° F
Signature Series – HP24 Models
Model Min Temp Set Max Temp Set
HP24R 33° F 42° F
HP24F -10° F 10° F
HP24B 33° F 48° F
HP24W 45° F 65° F
HP24T 33° F 42° F
Signature Series – HP48 Models
Model Min Temp Set Max Temp Set
HP48WO 40° F 65° F
HP48WW 40° F 65° F
Signature Series Sottile
Model Min Temp Set Max Temp Set
HH24RS 33° 42°
HH24BS 33° 48°
HH24WS 45° 65°
ADA-Compliant Series
Model Min Temp Set Max Temp Set
HA24FB -10° 10
LED Mode Function
ON Compressor is on
Flashing Anti-short cycle
delay is on
ON Defrost is on
ON Alarm is on
Flashing You are in the process of 
programming the unit
ThefollowingtabledescribesLEDfuncons.
DIGITAL TEMPERATURE CONTROL
C-Series Models
Figure 2. nEW 961 Digital Temperature Controller
Perlick C-Series units come standard with digital control.
Programming Button Denitions:
 STAND-BY (ESC)
Press and release
•  Returns to the previous 
menu level
•  Conrms parameter value
Press for at least 5 sec.
•  Activates the Standby 
function (o ) (When 
outside the menus)
 SET (ENTER)
Press and release
•  Opens Machine Status menu 
and displays alarms (if active)
Press for at least 5 sec.
•  Opens Programming menu
•  Conrm commands
 UP
Press and release
•  Scroll menu items
•  Increases values
Press for at least 5 sec.
•  Activates the Manual 
Defrost function
 DOWN
Press and release
•  Scroll menu items
•  Decreases values
Press for at least 5 sec.
•  Function can be congured 
by the user 
1.Press .“SP”willbedisplayed.Press  again to display 
currentsetpointtemperature.
2.Press  and   to modify it and   or  tosavethe
change.
Toturntheunito,pressandhold foratleast5seconds.
“OF”willbedisplayed.Toturntheunitonagain,pressandhold
foratleast5seconds.
NOTE: Dependent on the model and conguraon, the 
controllers have been programmed to only allow a temperature 
adjustment within a specied range. See the chart below for the 
specied range allowed for your unit.










