Use and Care

2. GT600 Growler filler tube is sized to fit
the Perlick 650SS Flow Control Faucet
3. Insert Growler filler tube into the
spout of the 650SS Flow Control Faucet
4. Insert filler tube into rinsed growler
then pull handle forward to begin flow.
5. Adjust flow control lever to achieve
a clean pour – minimize foam.
6. Push handle back to stop flow
when a slight amount of foam
begins to crown up through the
mouth of the growler.
7. Screw on cap firmly to create
a tight seal. Foam under the cap
ensures that no air is trapped in
the growler.
A perfectly poured growler.
• Minimal foam waste.
• Maximum freshness.
How to fill a growler using a Perlick Rinser, 650SS
Flow Control Faucet and a GT600 growler filler tube
1. Rinse growler to prepare for
filling.
perlick.com
9