Installation Guide

STEP #6: SELECT THE CABINET
THAT WILL BE PLACED ON THE RIGHT
SIDE. SECURE (1) 1013719-1TO THE
FRONT BASE WITH (2) 1008781 SCREWS
1
1
7
STEP #7: REMOVE ALL
PROTECTIVE FILM FROM THE
CENTER TRIM (1015035-1).
STEP #8: ATTACH THE CENTER
TRIM TO LEFT SIDE OF THE
CABINET THAT WILL BE ON THE
RIGHT, WITH (6) 1010546.
BEFORE FULLY TIGHTENING
SCREWS, MAKE SURE THE
CENTER
TRIM SITS FLUSH WITH THE
CABINET FACE.
4
4
4
4
4
4
8
STEP #9: MOVE BOTH CABINETS
DIRECTLY NEXT TO EACH OTHER SO
THAT THE LEFT CABINET COMES IN
CONTACT WITH THE CENTER TRIM.
STEP #10: SECURE BOTH CABINETS
TOGETHER BY SECURING THE
"ATTACHING BRACKET (1013719-
1)," PREVIOUSLY SECURED TO THE
RIGHTCABINET, TO THE LEFT
CABINET WITH (2) 1008781 SCREWS.
1
1
7
STEP #11: SECURE BOTH
CABINETS TOGETHER AT THE
TOP WITH (2) 1013719-1 AND
(8) M50050-466
11
7
7
11
STEP #12: SECURE BOTH CABINETS
TOGETHER AT THE BACK WITH (1)
1013719-1 AND (4) 1008781
STEP #13: ONCE ALL BRACKETS HAVE
BEEN SECURED IN PLACE, ATTACH THE
FRONT GRILLS BACK ONTO THE UNT.
STEP #14: PLUG POWER CORD (1012862)
INTO HEATING ASSEMBLY CONNECTOR
NOTE: HEATING ASSEMBLY CAN UTILIZE
SAME ELECTRICAL CIRCUIT AS THE
CABINET
7
1
6
POWER CORD
FOR HEATING
ASSEMBLY
PERLICK CORPORATION
MILWAUKEE, WI 53223
PROPERTY OF THE PERLICK CORP.
NOT TO BE COPIED OR USED DETRIMENTAL TO OUR INTERESTS
DR.:
DATE:
1014974
UO
SCALE: 1:50
D:\Perlick\Engineering\Projects\Refrigeration\1601802\CAD Files\1014974.slddrw
SHEET 2 OF 2
12/12/2017