Service Manual

Column Refrigeration Service Manual
Return to Table of Contents
81
8.8 Replace Door Gasket
STEP 1
Door and drawer gaskets can be replaced without
removing the door or drawer from the cabinet.
Open the door or drawer.
STEP 2
Remove gasket by lifting at one corner and pulling
gasket away from door/drawer. Work around door/
drawer until gasket is free.
STEP 3
Toreplace,startatonecornerandpressrmlyto
seat the gasket dart in the channel of the door/
drawer frame. Feel for a click to indicate the dart is
completelyseated.Installallcornersrstandthen
work your way around the perimeter of the door/
drawer to seat the gasket into its track.
STEP 4
Finish by going around the gasket once more to
feelforanygapsandtoensurethegasketisat
and fully seated.
8.9 Replace Door
STEP 1
Deactivate Hinges (see Section 8.7.).
STEP 2
RemoveDoorTrimCoverandcondenserairow
divider from Overlay
(see Section 8.1.).
STEP 3
Remove Overlay Panel (see Section 8.1.).
STEP 4
Remove the fasteners holding the door to the
hinges.
Follow reverse instructions to install the new door.
Figure 8-8. Removing gasket.