Service Manual

Column Refrigeration Service Manual
Return to Table of Contents
67
7.3.1 Replace Wine Lighting (cont.)
STEP 2
Usingsmallatscrewdriverpryoutlightcoveringeachledlightboardoncabinetsidewalls(Uppercovers
have a cut-out at the top of each opening, lower covers have cut-out at the bottom of each opening).
STEP 3
Lightboardsareadhesivebacked,sousingaatbladescrewdriver,startatoneendofboardandprythe
board of the light housing. Gradually work your way from one end to the other to remove completely.
Be careful while removing cover, do not scratch
liners.
CAUTION
Figure 7-2.2. Pry Light Covering
Figures 7-2.3. Pry Light Housing Board