Service Manual

Column Refrigeration Service Manual
Return to Table of Contents
54
STEP 1
Remove Refrigeration Module from cabinet by following instructions in
Section 6.6.
STEP 2
Remove the four retaining cotter pins and washers from the tabs that secure the compressor to the base.
STEP 3
Carefully lift the compressor up so the rubber feet clear the tabs and rotate the compressor slightly to
access the inverter mounting screw.
6.9 Replace Inverter
Disconnect power to the unit before working on
product to avoid electrocution hazard.
Figure 6-15.1. Remove Cotter Pins
Figure 6-15.2. Lift And Rotate Compressor
WARNING