Service Guide

Column Refrigeration Service Manual
Return to Table of Contents
94
1. ROTATE THE BIN ALL THE WAY DOWN, SO IT IS RESTING ON
THE BOTTOM OF THE CABINET FULLY OPEN.
2. LOCATE THE END FITTING ON THE GAS SPRING ON THE LEFT
SIDE OF THE BIN AND USING THE FLAT HEAD SCREWDRIVER,
RELEASE THE END FITTING BY PLACING THE FLAT HEAD
SCREWDRIVER INTO THE RELEASE LATCH AND PRYING
OUTWARD TO DISENGAGE THE END FITTING FROM THE
CABINET WALL FITTING.
Removal - Damper Tip-Out Bin
Operation #1
Operation #2
1. Rotate the bin all the way down, so it is
resting on the bottom of the cabinet fully
open.
2. Locatetheendttingonthegasspringon
theleftsideofthebinandusingtheat
headscrewdriver,releasetheendtting
byplacingtheatheadscrewdriverinto
the release latch and prying outward to
disengagetheendttingfromthecabinet
walltting.
1. Remove all contents from the tip-out bin, including glass
divider and bottom panel.
2. Open tip-out bin until the right side damper end is showing.
3. While supporting the tip-out bin, locate the damper end
ttingontherightside.Usingaatheadscrewdriver,
releasetheendttingonthedamper,byplacingtheat
head screwdriver into the release latch and prying inward to
disengagetheendttingfromthebintting.