Planning Guide

Visit perlick.com/residential for the latest information on how to install Perlick CR24 column
refrigeration. To purchase Perlick accessories, contact your local Perlick Residential dealer.
© 2018 Perlick Corporation
OPENING DIMENSIONS FOR INSTALLING THREE UNITS SIDE-BY-SIDE
As with dual installations, choose your desired column configuration below and match to the
opening (blue label) drawing for the proper cutout dimensions (applies to units installed both
with or without dual installation kit.)
For installations involving more than three cabinets, combine the opening dimensions for the
openings which correspond to the combined Hinge and Handle combinations shown in this guide.
Measurements shown in inches (“)
90°
*90° HINGE PIN
Doors open to 105°. The
90° hinge pin stop can be
installed. If hinge pin is
installed, all gaps between
cabinets can be 1/2”.
If using hinge pins on all
units, refer to Opening
Dimensions E.
D. HINGE CONFIGURATIONS
LEFT - LEFT- LEFT
RIGHT - RIGHT - RIGHT
75-1/4
2
No cabinets physically joined
together in this conguraon
2
E. HINGE CONFIGURATIONS
LEFT - RIGHT- LEFT
RIGHT - LEFT - RIGHT
All cabinets physically joined
together in this conguraon
72-1/4”
1/2 1/2
F. HINGE CONFIGURATIONS
LEFT - LEFT - RIGHT
RIGHT - RIGHT - LEFT
(2) cabinets physically joined
together in this conguraon
73-3/4
2
1/2
G. HINGE CONFIGURATIONS
RIGHT - LEFT - LEFT
LEFT - RIGHT - RIGHT
(2) cabinets physically joined
together in this conguraon
73-3/4
1/2 2
(D)
OPENING
(E)
OPENING
(F & G)
OPENING
76
84
38
12
10
12
84
12
10
12
36-1/2
73
74-1/2
84
37-1/4
12
12
10
FORM NO. Z2549
REV. D-08/03/2018
49-1/2”
48”
8