Planning Guide

OPENING DIMENSIONS FOR A
SINGLE UNIT
Perlick columns allow you the
freedom to install refrigeration
separately anywhere in the kitchen.
Columns are designed to be
integrated into cabinetry, however,
factory installed stainless steel side
panels are available for installations
where the side of the column is
exposed.
48
1/2
A. HANDLE TO HANDLE
B. HINGE TO HINGE
C. HANDLE TO HINGE*
1/2
48
49-1/2
2
(A & B)
OPENING
(C)
OPENING
48-1/2
84
12
10
12
84
50
12
10
12
OPENING DIMENSIONS FOR INSTALLING TWO UNITS SIDE-BY-SIDE
Perlick columns can be installed side-by-side in a variety of configurations provided the following
installation specifications are met. Hinge/handle locations and adjacency to walls/structure must
be taken into consideration during the planning process. Choose your desired column
configuration on the left and match to the opening (blue label) drawing on the right for the
proper cutout dimensions (applies to units installed both with or without dual installation kit.)
4
24
SIDE
WALL
CABINET
DOOR
FRAME
FACE
Measurements shown in inches (“)
Measurements shown in inches (“)
90°
*90° HINGE PIN
Doors open to 105°. The
90° hinge pin stop can be
installed. If hinge pin is
installed, all gaps between
cabinets can be 1/2”.
If using hinge pins on all
units, refer to Opening
Dimensions A & B.
84
25
24
22-1/8 TO
CABINET
21-9/16 TO
GRILL
83-7/8 TO
TOP OF
OVERLAY
4 - 6
TOE KICK
3/4 OVERLAY
24-3/4
OVERALL
24 TO FRONT
OF DOOR FRAME
23-3/4
OVERALL
7