Installation guide

Perle 10/100/1000 Ethernet Extended Temperature Media Converter

Installation Guide

Overview

This document contains instructions necessary for the installation

and operation of the Perle Standalone Extended Temperature

10/100/1000 rate converting Media Converters (S-1110-XT).

These products have the ability to convert 10/100/1000Base-T

cable connections (copper) to 100/1000Base-X connections

(fiber). The fiber connection can be either single mode (SM) or

multimode (MM) and can operate over different wavelengths and

distances, depending on the model selected (see table below).

Extended Temperature Models

Model

Connector

(xx)

Mode

Distance

Wavelength

(TX/RX)

S-1110-M2xx05-XT

SC/ST

550 m/1804

850 nm

S-1110-S2xx10-XT

SC/ST

10 km/6.2 mi.

1310 nm

S-1110-S1SC10U-XT

10 km/6.2 mi.

1310/1490 nm

S-1110-S1SC10D-XT

10 km/6.2 mi.

1490/1310 nm

S-1110P-SFP-XT SFP

Note 1.

Note 1: Fiber characteristics will depend on the SFP fiber module

selected.

Please visit Perle’s website for the most up to date Installation

guides models and specifications.

http://www.perle.com/