Datasheet

Perle 10/100 Ethernet Media Converter – Installation Guide
7
Duplex (copper) (Switch 4)
Switch Position Mode
Up (default) Full
Down Half
NOTE: When Auto Negotiation (SW1) is set to Off, the media
converter will use this Duplex setting for its copper connection.
Full In the Up switch position; the media converter will be set to
Full Duplex mode.
Half: The media converter will be set to Half Duplex mode.
Speed (Switch 5)
Switch Position Mode
Up (default) 100
Down 10
NOTE: When Auto Negotiation (SW1) is set to Off, the media
converter will use this Speed setting for its Ethernet copper
connection.
100: Switch 5 in the Up position will try to establish the copper link
connection at 100 Mbps.
10: The media converter will try to establish the copper
connection at 10 Mbps.