Datasheet

Perle 10/100 Ethernet Media Converter – Installation Guide
11
Operation
Status LED
The Perle 10/100 Ethernet Media converters have six single color
status LEDs located on the front panel of the unit.
PWR
On – Power is applied to the
unit.
Blinking (slow) – The unit is in
Loopback mode.
Blinking (fast) – The unit has
a hardware failure.
FDF (fiber)
On – Full Duplex Mode.
Off – Half Duplex Mode.
LKF (fiber )
On – The fiber link is present
Off – No fiber link is present.
Blinking (fast) – The fiber link
is present and receiving data.
100
On – 100 Mbps on copper link.
Off – 10 Mbps on copper link.
FDC (copper)
On – Full Duplex Mode.
Off – Half Duplex Mode.
LKC (copper)
On – The copper link is present.
Off – No copper link present.
PWR 100
FDC FDF
LKF LKC