User Guide

IRG7440 5G Cellular Router Quick Start Guide 5500480
Version #A01.13.2022
4
Fast Setup Mode
Fast Setup provides a simple method of doing an initial setup
from a PC. Your router is shipped in factory default mode.
1. Your PC must be set to obtain an IP address
automatically using DHCP.
2. Plug the PC into your router’s Ethernet interface.
3. When the Power LED is flashing green, use a web
browser, enter
http://192.168.0.1
to access your router.
On the setup screen, select, Getting Started.
4. Once connected, fill in the required fields, apply changes
to save and exit. Your configuration changes will be
immediately applied to the router
5. The router’s web configuration sign-on screen will be
displayed. Using the credentials you previously defined
in Step 4, you can now access your router’s full
configuration.
For alternative methods of performing and initial Setup, see
the IRG7440 5G Cellular Router Hardware Installation
Guide.
© 2022 Perle Systems Limited. All rights reserved.