Installation guide

- 6 - IDS-108F Installation Guide
Reset Button
To reset the IDS-108F insert a paper clip into the air hole vent
(see Top view of the IDS-108F) and gently press the reset button.
The LEDs on the IDS-108F will go On and then momentarily Off
when released to show that the unit has been reset. All links will
be dropped and the MAC tables will be cleared.
Status LED (with two fiber ports)
P1 / P2– Power (Green LED)
On: Power present
Off: No Power present
Fiber Port 9/10 (Green LED)
On: Link up
Flashing: Link up and Ethernet activity detected
Off: Link down
Port Link (Green LED)
On: Link up
Flashing: Link up and Ethernet activity detected
Port Speed (Yellow LED)
On: Communicating at 100 Mbps
Off: Communicating at 10 Mbps