Installation guide

- 2 - IDS-108F Installation Guide
Overview
This document contains instructions necessary for the installation
and operation of the Perle IDS-108F Ethernet switch. This
Ethernet switch can be ordered as an 8-port RJ-45 switch or as an
8-port RJ-45 switch with one or two SC or ST fiber ports. The fiber
ports can be either single mode (SM) or multimode (MM)
depending on the model selected and they can operate over
different wavelengths and distances. Visit the Perle website for the
most up to date installation guides, models and specifications.
http://www.perle.com/
Note: xxxxxxxx indicates models numbers for this product line.
TP = twisted pair
Features
• 10/100Base-TX, one or two ST/SC fiber ports, multi/single
mode
• IEEE 802.3/802.3u/802.3x
• 10/100, Full/Half duplex, MDI/MDIX with auto-sensing
• Auto-negotiation on copper ports
• Redundant DC power inputs
• Rugged high-strength case
• Industrial temperature models
• Din-rail or wall/panel mounting
Note – In this guide the various models will be referred to as the IDS-108F
Model Port 1-8 Port 9 and 10
IDS-108F TP (RJ-45) empty
IDS-108F-xxxxxxxx TP (RJ-45)
1 or 2 fiber
ports
IDS-108F-XT
(Industrial Temperature Model)
TP (RJ-45) empty
IDS-108F-xxxxxxxx-XT
(Industrial Temperature Model)
TP (RJ-45)
1 or 2 fiber
ports