Installation guide

- 2 - IDS-105G Installation Guide
Overview
This document contains instructions necessary for the installation
and operation of the Perle IDS-105G Ethernet switch. This
Ethernet switch can be ordered as a 5-port RJ-45 switch or as a 5-
port RJ-45 switch with either one fiber port (SC or ST) or up to two
SFP transceiver ports. The fiber port can be either single mode
(SM) or multimode (MM) depending on the model selected and
they can operate over different wavelengths and distances. The
SPF transceiver ports support SFP’s supplied by Perle, Cisco or
other manufacturers of MSA complaint SFP modules.
Visit the Perle website for the most up to date installation guides,
models and specifications. http://www.perle.com/
Note: xxxxxxxx indicates models numbers for this product line.
TP = twisted pair
* fiber characteristics are determined by the SFP inserted
Model Port 1-5 Port 6 Port 7
IDS-105G TP (RJ-45) None None
IDS-105G-xxxxxxxx TP (RJ-45) Fiber port Not applicable
IDS-105G-SFP TP (RJ-45)
SFP
transceiver
port *
Not applicable
IDS-105G-DSFP TP (RJ-45)
SFP
transceiver
port *
SFP
transceiver
port*
IDS-105G-XT
(Industrial
Temperature)
TP (RJ-45) None None
IDS-105G-SFP-XT TP (RJ-45)
SFP
transceiver
port*
Not applicable
IDS-105G-DSFP-XT TP (RJ-45)
SFP
transceiver
port*
SFP
transceiver
port*
IDS-105G-xxxxxxxx-XT
(Industrial
Temperature
TP (RJ-45) Fiber port Not applicable