Remote I/O System User Guide

RIO Remote I/O System User Guide
Installing RIO under SCO OpenServer 5 and SCO OpenServer 6
Page 70
Chapter 2 Installing hardware and software
A popup window is now displayed showing the currently inactive RTAs.
6. In the pop-up window select the RTA you wish to remove and press the Enter key.
A confirmation prompt is now displayed, asking if you want to delete the selected RTA.
7. At the confirmation prompt, select Yes and press the Enter key.
8. Press the Esc key twice
A prompt window is now displayed asking you if you want to save changes before exiting
config.rio.
9. In the prompt window, select Y and press the Enter key.