Remote I/O System User Guide

RIO Remote I/O System User Guide
Installing a dual host fail-safe link (UNIX only)
Page 196
Chapter 2 Installing hardware and software
Transferring control to the slave system
If the master system fails you need to use the following procedure to transfer control of the
RTAs to the slave system
1. On the slave system, from within the conifg.rio Main menu, click on Boot mode: > Boot
all RTAs .
1. On the slave system, from within the conifg.rio Main menu, click on
Reset host interconnections.
All RTAs and ports will be reset (this may take some time), and when complete will be
accessible from the slave system.