User's Guide

SPEED Serial Adaptors User guide
SCO OpenServer 5
Page 99
SCO OpenServer 5 error messages
Error message Reason Action required
ERROR: unit @0xnnnnnnnn has
bad resource(s)
Incorrectly installed or faulty
card.
Incorrect BIOS settings.
1. Ensure that you have followed the
installation procedure correctly.
See page 21.
2. Check BIOS settings.
3. If the problem persists try another card.
See page 21 and page 69.
ERROR: unit @0xnnnnnnnn not
mapped
Insufficient memory available
to kernel.
Reconfigure system/kernel memory
parameters.
ERROR: unit @0xnnnnnnnn not
initialised
Incorrectly installed or faulty
card.
1. Ensure that you have followed the
installation procedure correctly.
See page 21.
2. If the problem persists try another card.
See page 21 and page 69.
WARNING: unit @0xnnnnnnnn not
configured
System error. 1. Uninstall the driver and remove all
Speed cards from the system.
See page 33
2. Re-install the driver and cards taking
care to follow the correct procedure.
See page 21 and page 69.
WARNING: No Speed ports
configured
No cards installed.
Installed cards suffer from
one or more of above
symptoms.
1. Install cards. See page 69.
2. Resolve any above listed faults.