User's Guide

SPEED Serial Adaptors User guide
Installing under Linux
Page 68
Chapter 2 Installing drivers and host cards
4. If you require callout devices as well as tty devices, at the command prompt, type ls -l /
dev/cua[0-9]* and press the Enter key to determine the major and minor node numbers
for callout devices.
The major and minor node numbers are now displayed as shown in the next example.
5. At the command prompt, type the following (pressing the Enter key after each one):
Your system can now use the SPEED serial adaptor cards you have installed.
crw-rw-rw- 1 root tty 4, 64 May 5 1998 /dev/cua0
crw------- 1 root tty 4, 65 Nov 12 14:12 /dev/cua1
mknod /dev/cua2c566
mknod /dev/cua3c567
mknod /dev/cua4c568
mknod /dev/cua5c569
Same as that for /dev/cua0
Uses next available number