User's Guide

SPEED Serial Adaptors User guide
Installing under Linux
Page 65
Chapter 2 Installing drivers and host cards
General installation procedure for Linux
The general procedure for installing and configuring host cards, drivers software and
associated utilities for the Linux operating system is as follows:
1. Install any PCI host cards you require into your system. See Installing a PCI host
card on page 69.
2. Install the SPEED Linux drivers onto your system using the procedures described in
Installing drivers onto your system on page 66.
3. Create devices for the required ports using the procedures detailed in Creating devices
for the attached ports on page 67.
Your system can now use the SPEED serial adaptor cards you have installed.