User's Guide

SPEED Serial Adaptors User guide
Installing under Windows 2000/XP/Server 2003/Vista/Server 2008
Page 60
Chapter 2 Installing drivers and host cards
Installing device drivers and utilities onto your system
To install or enable the SPEED device drivers on your system proceed as follows;
1. Turn on your PC and if required, log in.
If you have installed any new host cards a Found New Hardware message is briefly
shown followed by the Found New Hardware wizard as shown in the pictures.
2. In the Found New Hardware wizard click on the Cancel button.
3. Download the lastest SPEED driver zip file from the Perle website for your operating
system:
pserial-x86.zip for 32-bit Windows operating systems.
pserial-amd64.zip for 64-bit Windows operating systems.
pserial-ia64.zip for 64-bit Windows Itanium operating systems.
4. Unzip the driver zip file to a local directory. We recommend that you use the
pserial-setup-<arch>.exe file, which will launch the installation wizard, to install the
SPEED driver.