User's Guide

SPEED Serial Adaptors User guide
Installing under SCO UnixWare
Page 44
Chapter 2 Installing drivers and host cards
6. In the Modify Serial Port window, click on the Port settings button.
The Port settings window is now displayed.
7. In the Port settings window, select the Data bits and Parity values you require and click
on OK.
8. In the Modify Serial Port window, click on OK to accept the changes you have made and
close the window.
9. Repeat steps 3. to 8. until you have configured the serial ports for all the host cards you
require.
10.In the Serial Manager menu click on Host > Quit to quit Serial Manager and close the
window.