User's Guide

SPEED Serial Adaptors User guide
Installing under SCO OpenServer
Page 26
Chapter 2 Installing drivers and host cards
16.In the Speed Window Installation menu, click on Options > Close to close the window
and continue the installation process.
If you select Re-link kernel, a message window is displayed at the end of the driver
installation prompting you to re-boot the system.
17.In the message window click on OK to continue the installation process.
The following message is now displayed upon completion of the installation process.
18.In the message window, click on OK to close the window.
The software manager window is now updated to show the driver you have installed as
shown in the next picture.